This is the electric powered, radio controlled, ready to run AquaCraft 
UL-1 Superior Brushless FE Competition Hydroplane. For ages 14 and older.

FEATURES: Hull: Lightweight painted fiberglass with molded-in center tub
            section that houses the motor, batteries and radio equipment,
            breakaway fins detach under stress to prevent damage to the hull,
            attach with two-sided tape and float for easy retrieval
          Motor: AquaCraft 6-pole 36-56-2030kV brushless marine motor created
            exclusively for the UL-1 and high-speed hauling, 4mm motor plugs
            boost efficiency
          Radio: Tactic TTX-240 2.4GHz system, 2-ch pistol grip transmitter
            with steering and throttle, and steering trim adjustment, Tactic
            TSX200 standard servo for rudder control, Tactic TR324 3-channel
            receiver
          Electronic Speed Control: Water cooled, waterproof, 60A for LiPo
            usage, a "Stutter Bump" warning at 12V and an auto cut-off at 11.6V
            insure low voltage protection, ESC is also NiCd and NiMH compatible
          Strut: Black anodized CNC-machined aluminum, adjustable to change
            prop depth and angle to match water conditions
          Turn Fin: 0.08" (2mm) thick aluminum with tapered leading edge to
            reduce drag, adjustable for top performance
          Cowl: ABS plastic with magnetic locking system
          Propeller: 3-blade
          Warranty: Ninety day limited

INCLUDES: AquaCraft UL-1 Hydroplane, brushless marine motor and ESC, 2.4GHz
            radio system, decal sheet, instruction manual and plywood stand

REQUIRES: AA Batteries: Four for transmitter
          LiPo Batteries: Two LiPo 3200mAh 7.4V
          Battery Chargerand Balncer : LiPo Compatible
          

SPECS:    UL-1 Superior;
          Hull Length: 27" (685mm)
          Overall Length: 29-1/4" (744mm)
          Width: 14-1/4" (360mm)
          Overall Height: 6-3/4" (170mm)
          Weight (Less Batteries): 4lbs, 1oz (1.84kg)
          Weight RTR (with two 3200 LiPos): 4lbs, 14oz (2.21kg)

            Brushless Motor;
          Diameter: 1.4" (36mm)           kV Rating: 2030RPM/V
          Length: 2.2" (56mm)             Input Voltage: 7-18.5V
          Shaft Length: 0.59" (15mm)      Max Constant Current: 50A
          Shaft Diameter: 0.20" (5mm)     Max Surge Current: 80A/five seconds
          Overall Length: 2.8" (71mm)     No Load Current: 5.0A
          Weight: 7.5oz (212g) including connectors

            ESC;
          Length: 3.25" (83mm)     Battery Connectors: 2 male Ultra Deans plugs
          Width: 1.5' (38mm)       Motor Connectors: 4mm bullet (three)
          Height: 0.67" (17mm)     Input Voltage: 12-14 NiMH
          Weight: 3.8oz (109g)                    4 cells LiPo
          Wire Gauge: 14AWG                       8-20V input w/o BEC
          Output Current: 60A continuous maximum  BEC: 5.2V/2A
                          72A surge maximum       Stutter Bump Voltage: 12V
          Max Output Power: 720 watts             Low Voltage Cutoff: 11.6V
          On-Resistance: 0.003 ohms               Thermal Cutoff: 110°C
          Operating Frequency: 8kHz               Timing Angle: 10°